Skip to main content

Modern Trends in MicroGrids: A Review


Volume 4 Issue 4 September - November 2016
Review Paper
G. Manohar*, D.Sreenadh reddy**
* Associate Professor, Department of Electrical and Electronics Engineering, CVR College of Engineering, Hyderabad, India.
** Assistant Professor, Department of Electrical and Electronics Engineering, CVR College of Engineering, Hyderabad, India.
Manohar, G., and Reddy, D.S. (2016). Modern Trends in MicroGrids: A Review. i-manager’s Journal on Circuits and Systems, 4(4), 33-40. https://doi.org/10.26634/jcir.4.4.12396
Abstract
Microgrids provide a powerful solution for enabling the conversion of the electric grid to a more distributed architecture and providing greater flexibility of electricity service to customers. Microgrids are small, independent electric-power grids, including both sources and loads. Microgrids have the capability to connect and disconnect effortlessly from the traditional grid. A microgrid comprises distributed generation, energy storage, loads, and a control system that is capable of operating in grid-tied mode and islanded mode. The concept of microgrid including it's architecture, components, types, mode of operation, various projects, benefits, and the challenges of microgrids have been summarized in this paper.

Comments

Popular posts from this blog

Fuzzy Based Power Quality Improvement In Grid Connected Microgrid At The Distribution Level

Volume 1 Issue 2 March - May 2013 Research Paper Fuzzy Based Power Quality Improvement In Grid Connected Microgrid At The Distribution Level Naveen Bolisetti*, Mothiram Bhukya** * Department of Electrical and Electronics Engineering, SRKR Engineering college, Bhimavaram, Andhra Pradesh, INDIA. ** Department of Electrical and Electronics Engineering, SRKR Engineering college, Bhimavaram, Andhra Pradesh, INDIA. Bolisetti, N., and Ram, M. B. (2013). Fuzzy Based Power Quality Improvement In Grid Connected Microgrid at the Distribution Level.  i-manager’s Journal on Circuits and Systems , 1(2), 1-6.  https://doi.org/10.26634/jcir.1.2.2288 Abstract This paper suggests a new control strategy that consists of a grid interfaced four leg inverter control system using adaptive fuzzy controller for a 3-phase 4-wire distribution system that is capable of simultaneously compensating problems like power factor, current imbalance and current harmonics, and also of inject...

Design and Implementation of Low Power ALU Using 8T Full Adder with FinFETs

Volume 5 Issue 4 September - November 2017 Research Paper Design and Implementation of Low Power ALU Using 8T Full Adder with FinFETs M. Chandra Sekhar Reddy*, P. Ramana Reddy** * Research Scholar, Department of Electronics and Communication Engineering, JNTUA, Anantapuramu, Andhra Pradesh, India. ** Professor, Department of Electronics and Communication Engineering, JNTUACEA, Anantapuramu, Andhra Pradesh, India. Reddy, M. C. S., and Reddy, P. R. (2017). Design and Implementation of Low Power ALU Using 8T Full Adder with FINFETS.  i-manager’s Journal on Circuits and Systems , 5(4), 8-14.  https://doi.org/10.26634/jcir.5.4.13939 Abstract An Arithmetic and Logic Unit (ALU) is an advanced circuit that performs number-crunching and rationale operations. ALU is an essential building piece of the focal preparing unit of a PC. The power, devoured by the ALU has a direct effect on the power disseminated from the processor. Thus, a plan is required to execute the ...

Power Efficient Functional Units for High Speed Computations

Research Paper Power Efficient Functional Units for High Speed Computations B. Dinesh*, R. Jagadeesh**, M. Kathirvelu*** *,** PG Students, Department of ECE, KPR Institute of Engineering and Technology, Coimbatore, Tamil Nadu, India. *** HOD & Professor, Department of Electronics and Communication, KPR Institute of Engineering and Technology, Coimbatore, Tamil Nadu. Dinesh, B. Jagadeesh, R. and Kathirvelu, M. (2013). Power Efficient Functional Units For High Speed Computations.  i-manager’s Journal on Circuits and Systems , 1(3), 13-18.  https://doi.org/10.26634/jcir.1.3.2443 Abstract Power consumed per unit switching activity in a CMOS based computational unit is greatly dependent on the power consumption of the sum and carry generation units. This paper is focussed on reducing area and PDP of the computational units through gate level and transistor level optimisation. At transistor level 6T Mux based CMOS-CPL XOR gates with stable rise and fall times ar...