Skip to main content

Distribution Systems Reliability Analysis with Power Quality issues and Neutral Currents Compensation Mistreatment MLI-DSTATCOM

Volume 4 Issue 2 March - May 2016

Research Paper

Distribution Systems Reliability Analysis with Power Quality issues and Neutral Currents Compensation Mistreatment MLI-DSTATCOM

T. Rakesh*, V. Madhusudhan**, M. Sushama***
* Research Scholar, Department of Electrical and Electronics Engineering, Jawaharlal Nehru Technical University, Hyderabad, India.
** Principal & Dean, Kandula Obul Reddy Memorial College of Engineering, Kadapa, India.
** Professor, Department of Electrical and Electronics Engineering, Jawaharlal Nehru Technical University, Hyderabad, India.
Rakesh, T., Madhusudhan, V., and Sushama, M. (2016). Distribution Systems Reliability Analysis with Power Quality issues and Neutral Currents Compensation Mistreatment MLI-DSTATCOM. i-manager’s Journal on Circuits and Systems, 4(2), 1-16.https://doi.org/10.26634/jcir.4.2.8097

Abstract


The “Multilevel Converter” has a massive interest at intervals for the vigour programs enterprise. The fundamental constitution of the construction converter is to decompose a curving voltage from some stages of voltages. Construction voltage offer converters area unit manufacturing as a latest breed of energy converter choice for prime energy applications. These converter topologies will generate high-quality voltage waveforms with vigor semiconductor switches acting at a frequency shut. Among the three construction converter topologies, the five-level and 7-level construction convertors constitute a promising replacement, providing a standard style that will be extended to permit an electrical device-less affiliation. This paper offers a three-segment, five stages and 7 stages cascaded construction voltage supply electrical converter headquartered DSTATCOM for vigour line learning to create stronger vigour satisfactory at intervals of the distribution network. Eventually, a curving PWM (SPWM) procedure is adopted to look at the potency of MLI based DSTATCOM. The outcomes the area unit brought by suggests that of Mat science lab / Simulink application package deal.

Comments

Post a Comment

Popular posts from this blog

Continuous Overvoltage Characteristics of Surge Protected Power Strips

Volume 5 Issue 4 September - November 2017 Research Paper Continuous Overvoltage Characteristics of Surge Protected Power Strips Cengiz Polat* Assistant Professor, Department of Electrical and Electronics Engineering, Istanbul University, Istanbul, Turkey. Uzunoglu, C. P. (2017). Continuous Over Voltage Characteristics of Surge Protected Power Strips.  i-manager’s Journal on Circuits and Systems,  5(4), 1-7.  https://doi.org/10.26634/jcir.5.4.13938 Abstract Increasing applications of constantly developing electronic devices require delicate voltage and current protection. Although the electrical network is monitored continuously, undesired over currents and over voltages may occur on the distribution system due to failures. Most of the electronic switch gear is connected via surge protected power strips in indoor applications, where current protection is vital. Surge protected power strips are usually manufactured based on Metal Oxide Varistors (MOVs) ...
Post a Comment
Read more

Reduced Wirelength-Based Low Power Performance of Multibit Flip-Flop

Volume 1 Issue 4 September - November 2013 Research Paper Reduced Wirelength-Based Low Power Performance of Multibit Flip-Flop M.Karthick*, S. Vijayakumar** *PG Scholar, Department of Electronics and Communication Engineering, Paavai Engineering College, Namakkal, India. **Associate Professor, Department of Electronics and Communication Engineering, Paavai Engineering College, Namakkal, India. Karthick, M. and Vijayakumar, S. (2013). Reduced Wire length-Based Low Power Performance Of Multibit Flip-Flop.  i-manager’s Journal on Circuits and Systems , 1(4), 22-26.  https://doi.org/10.26634/jcir.1.4.2593 Abstract Power reduction is a main parameter to design VLSI circuits. In this paper, to design a number of D-flip flop performing at the same time, the given clock signal is reduced using multi bit flip-flop. The multi bit flip flop is mainly used to improve the clock power for the given common clock signal and to reduce the switching power. This method is p...
Post a Comment
Read more

A Review on Control strategies for LFC in Deregulated Scenario

Volume 1 Issue 1 December - February 2013 Review Paper A Review on Control strategies for LFC in Deregulated Scenario T. Anilkumar*, N. Venkata ramana** * Associate Professor, EEE Department, ACE Engineering College, Ghatkesar, Hyderabad, AP, India. ** Professor and Head of Deportment, EEE Department, JNTU Mantini, AP, India. Kumar, T. A., and Ramana, N., (2013). A Review On Control Strategies For LFC In Deregulated Scenario.  i-manager’s Journal on Circuits and Systems , 1(1), 27-36.  https://doi.org/10.26634/jcir.1.1.2197 Abstract In power system studies, Load frequency control is an important issue to supply sufficient and reliable electric power with good quality. The main objective of LFC is to maintain load frequency and tie-line power flow within permissible limits by adjusting megawatt output of LFC generators, so as to accommodate fluctuating load demands. This paper presents a brief review of different control techniques to researchers on design...
Post a Comment
Read more